300 amp - 3 phase AC to DC rectifier / 1600V - USA SELLER - FAST SHIP

Description

Tired of blowing up 100 Amp rectifiers?
Get a 300 Amp rectifier and just enjoy life.
You are bidding on one.
Three phase
full wave rectifier.
300 Amp / 1600 Volt.
Fast Ship!
From a seller in the
U
S
A.
Turns Wild AC power into DC power which can
charge batteries and run other DC circuits -
Caution:
Be sure to use some thermal conductive (CPU type) silicon paste when you bolt this down to a piece of aluminum certified heat sink (rated for 300 A)  or at least 12" by 12"  by 1/8" inch thick sheet of aluminum.  If this sheet of metal or the heat sink gets too hot you will need to aim a cooling fan at it.  Many people use liquid CPU coolers made for the large #8 Pentium chip type socket with the addition of a cooling fan on the radiator.
Specifications:
Amps: 300 AMP
Voltage: 1600V
Dimensions: 4.25" X 2.7" X 1.75"
Mounting hole diameter: .25"
300 Amp bridge rectifier has heavy 1/8" thick heat sink plate on bottom!
Made for professional use. Made by Lingshire!
Brand new and comes in white factory sealed box
(If it does not come in a sealed factory box it's probably a reject)
These units are AAA certified units and not rejected "B" or "C" types.
Buyer beware
.  Many internet sellers are not selling AAA rated silicon rectifiers but rather rejected parts which seem to work at first but overheat easily and have short service lives.
When you buy diodes or rectifiers make sure they are packed in a factory box reserved only for the AAA certified silicon semiconductor devices.  Also make sure you bolt it down to a
large aluminum heat sink or large plate with silicon heat dissipation paste
and mount them vertically in a cool shady place with lots of upward air flow behind and in front of and behind the heat sink.
NOTE:
NEVER MOUNT RECTIFIERS DIRECTLY ON WOOD OR DRYWALL SURFACES!
Make sure you do spend some time mounting it properly so it stays cool.
Remember:
If you overheat it, you eat it.