Biospherix ProOX Model P360 High Infusion Rate O2 Controller & Model E702 Sensor

Description

This
Biospherix ProOX Model P360 High Infusion Rate O2 Controller & Model E702 Sensor
is in great condition
and is guaranteed to be functional
.
This controller came from a local lab that had surplus lightly used equipment. We urge customers to view all photos as they show overall condition, included accessories and useful information. We will be happy to provide additional information as well as photos so please feel free to contact us with any questions.
ProOx 360 Overview
NEW OXYGEN CONTROL TOOL
The new
ProOx P360
is a handy little tool for people who do oxygen sensitive work. It makes oxygen control easy.
PHYSIOLOGIC CONTROL
Control setpoint can be anywhere from 0.1-99.9% oxygen. The
ProOx P360
senses oxygen inside the chamber and infuses either nitrogen to lower the concentration or oxygen to raise it.
WORKS IN ANY CHAMBER
The
ProOx P360
fits and controls oxygen within any semi-sealed enclosure. Its high output makes it ideal for larger chambers, and most chambers can be fitted in minutes.
CONTROL IS EFFICIENT
Feedback from sensor tells the
ProOx P360
high-infusion oxygen control tool exactly when and exactly how much gas to infuse. No gas is ever wasted!
OPERATION IS SIMPLE
Oxygen is quickly taken to setpoint and held there indefinitely. Any disturbances are immediately detected and corrected. Check calibration once in a while and don’t run out of gas. Otherwise it’s all automatic!
HANDLES ANY JOB
…Where ambient air oxygen (21%) is too high or too low, the
ProOx P360
can provide any other level you need.
…Where ambient atmosphere is not air, the
ProOx P360
can restore and maintain air-equivalent oxygen.
…Where oxygen consumptive or generative processes need to be countered, the
ProOx P360
can hold oxygen stable against destabilizing loads.
It can work continuously year round or on occasion as needed. No other oxygen control tool offers so much value!
Specification
ELECTRICAL POWER:
12 VDC at 2.5A
CONTROL RANGE:
0.1-99.9% oxygen
ACCURACY:
O
2
: ±1% at constant temperature/pressure ±2% over entire temperature range.
RESOLUTION:
0.1%
OXYGEN SENSOR:
Various application specific sensors available.
GAS SOURCE:
compressed gas tanks, liquid carboys (from headspace), or generators.
GAS SUPPLY:
pressurized O
2
and/or N2
GAS SUPPLY LINE:
1/4” I.D. hose, pressure rated to 40 PSIG.
GAS SUPPLY LINE PRESSURE:
1-40 PSIG
GAS INFUSION RATE:
1-140 S.C.F.H.
GAS CONSUMPTION:
depends on (1) size and leakiness of host chamber, (2) frequency and duration of opening chamber doors, and (3) oxygen level controlled.
GAS SUPPLY HOSE FITTING:
1/4” hose barb.
UMBILICAL LENGTH:
12 Ft. (custom lengths available).
SENSOR CABLE LENGTH:
12 Ft.
SENSOR CABLE DIAMETER:
6mm.
ALARM OUTPUT:
audible 40dB and visible flashing indicator.
ALARM MODES:
process high, process low, deviation high, deviation low, deviation band.
WEIGHT: 2.2lbs (Controller Only)
DIMENSIONS: 2.5”H x 8”W x 7”D (Controller Only)
Sensor Operational Parameters
HOST CHAMBER TEMPERATURE:
5-40°C (depending on sensor)
HOST CHAMBER CO
2
:
0.1-20% (depending on sensor)
HOST CHAMBER HUMIDITY:
0-95% RH. Non-Condensing
For additional information please copy and paste link below:
https://biospherix.com/wp-content/uploads/2017/11/Literature_ProOx-P360.pdf
If link is no longer available please contact us for copy of PDF