Bleed Kit & HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit For Seastar

Description

Bleed Kit:
Compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid without wasting a drop of that pricey Marine Hydraulic fluid.
Front Mount Steering Cylinder Seal Kit:
Fit for SeaStar Pivot/Front Mount Cylinders Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755.
MATERIAL:
DR-Auto
Your Best Auto Business Partner
Bleed Kit for Seastar & HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit for HC53xx, HC67xx Cylinders
Bleed Kit:
Compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid without wasting a drop of that pricey Marine Hydraulic fluid.
Front Mount Steering Cylinder Seal Kit:
Fit for SeaStar Pivot/Front Mount Cylinders Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755.
MATERIAL:
High quality brass fitting and PVC tube, Aluminum, steel and rubber ensure excellent mechanical and physical properties.DR-Auto product shows its good anti-oxidation, corrosion resistance and durability.
PACKAGE INCLUDE:
Bleed Kit includes 1 x hose with screw cap which fits for SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Bleed fittings. HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Wrench, 8 x varies O-rings.
100% SATISFACTION GUARANTEE:
If you're not 100% satisfied with Tool Kit, simply return it for a full refund in 60 days. Premium Support & 2 Years' Warranty.
Product Description:
Using Instruction:
1. Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland)
2.Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.
3. Use the pin wrench to remove the Old Seal Gland.
4.Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side.
5. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.
6. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque.
Item Specifics
Brand
DR-Auto
Manufacturer Part Number
DRQP914926
Warranty
2 Year
Type
Bleed Kit & Front Mount Hydraulic Steering Cylinder Seal Kit
Fitment
For Seastar HC53xx, HC67xx Cylinders
Set or Single item
Set
Model
HS5157
Payment
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
Shipping
1. Item will be shipped out
within 1-2 business day
after clear payment received.
2. Please make sure shipping address on your ebay account is
correct & up-to-date.
3. All of our items are shipped from our warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund.
Refund will be given as Money back
or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake
.
And all NON-seller mistake returns for refund are subject to
10 % re-stocking fee.
3. If you need return, please
contact
our customer service representative,
let us know the detailed problem and
end us some pictures for confirmation.
Contact Us
We
maintain high standards of
excellence Four 5-star
rating
and strive for
100%
customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us
immediately BEFORE you leave neutral
or negative
feedback, we will try our best to resolve any problem and make you satisfied.
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item number or order number in
all communications.
DR-Auto
Your Best Auto Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
New Arrival !
Engine Tool
Car & Truck Accessories
Generator Accessories
◈  Gas Cap Adapter
◈  Generator Tool Kit
◈  Other
Tool
◈  Home & Garden
◈  Bearing
◈  Engine Tool
◈  Oil Filter Cap
◈  Other
Tail Light Covers
◈  Other
Pool Lights
Parking Reverse Camera
Sunshade & Windshield
Car Keys Fobs & Remotes
Jeep Grand Cherokee
Seat Covers
JK Full Set Interior Decorate
Ford Mustang
Boat Parts
Blacksmithing
Other
Boat Parts
Knife Making Tongs Set
Auto Tools/Parts
JDG954B Crankshaft Gear & Front Crank Seal Installer For John Deere 1039, 4045
USD 199.97
Trim Rod Assy Kit For Mercury/Mariner Verado 200-300hp IL6 8M0118299 896157A01
USD 143.67
7040 Diesel Piston Ring Compressor Tool 5.4" Bore For CAT 3400,C-15, Cummins ISX
USD 168.81
22Pcs Car PDR Tools Pushrods Spring Kit Paintless Dent Repair Hail Removal Tool
USD 89.36
Injector Sleeve Cup Removal & Install Tool Kit For Caterpillar CAT 3126B C7 C9
USD 137.59
Injector Cup Nozzle Tube Remover & Installer Tool For Detroit Diesel J-47388-A
USD 116.99
PT-6400-C Diesel Cylinder Liner Puller Tool For Caterpillar, Cummins, Volvo etc.
USD 425.69
328.12031 Seal Replacement Kit For Sears Craftsman 2-Ton Floor Jack Hydraulic
USD 59.59
10Pcs Car Body Paintless Dent Repair Tools Push Rods Kit PDR Hail Removal Tool
USD 73.79
303-1513 Rear Crankshaft Seal Remover Tool For Ford 6.7L Powerstroke #Alt ST-148
USD 257.39
KK-4835 Air Compressor Piston Kit For Porter Cable Craftsman Devildiss Dewalt
USD 95.02
31 PCS Auto Oil Filter Socket Wrench For Many BMW, Volvo, Honda, Audi, Ford etc.
USD 100.35
Rear Axle Bearing Removal Puller Tool 09521-25011 for Toyota Trucks 1984-2018
USD 166.85
9U-6891 Injector Sleeve Remover Installer Set For CAT 3406E C10 C12 C15 C16 C18
USD 95.39
T-0220-700R4 Master Bushing Driver Set For GM 700-R4 4L60 4L65E Transmissions
USD 98.63
66697 Axle Shaft Seal Installer Tool For Ford 2005 to Current F-250 F-350 4x4s
USD 68.39
4918991 Crankshaft Front Seal Wear Sleeve Remover/Installer For Cummins ISX12/15
USD 213.20
Front Crankshaft Oil Seal Remover & Installer Kit For BMW N52 N53 N54 N55 Engine
USD 173.99
Hot Accessories
SeaStar HO5116 Hose Kit 16ft Hydraulic Outboard Steering Boat Teleflex Marine
USD 88.10
Steering Cylinder HC5345 FSM051 Replacement seal Kit Fit for Seastar Teleflex
USD 35.95
Boat Bleed Kit Filler Kit For Seastar Hydraulic Steering Systems Bleeder Hose
USD 22.81
Front Mount Hydraulic Steering Cylinder Seal Kit w/ Pin Wrench For HC5340,HC5341
USD 35.99
Bleed Kit & HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit For Seastar
USD 58.49
New Arrival
Camshaft Holding Tool & Chain Tensioner Set For Fit Ford 3.5L 3.7L 4V Engines
USD 35.00
NEW Back Up CCD Rear View Reverse Parking Camera for Toyota 4Runner 2002-2010
USD 22.40
Car Windshield Sunshade for 1985-2020 Jeep Wrangler JL JK TJ LJ YJ Sun Visor
USD 18.35
Oil Filter Wrench Cap Tool For 4-cylinder Toyota Corolla Prius Matrix Highlander
USD 9.80
Red Side Door Handle & Push Button Knobs Cover Trim For Jeep Wrangler JK 07-18
USD 25.42
Bleed Kit for Seastar & HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit for HC53xx, HC67xx Cylinders
Bleed Kit:
Compatible with Seastar hydraulic steering systems. Used for refilling your boat's steering system fluid without wasting a drop of that pricey Marine Hydraulic fluid.
Front Mount Steering Cylinder Seal Kit:
Fit for SeaStar Pivot/Front Mount Cylinders Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755.
MATERIAL:
High quality brass fitting and PVC tube, Aluminum, steel and rubber ensure excellent mechanical and physical properties.DR-Auto product shows its good anti-oxidation, corrosion resistance and durability.
PACKAGE INCLUDE:
Bleed Kit includes 1 x hose with screw cap which fits for SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Bleed fittings. HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Wrench, 8 x varies O-rings.
100% SATISFACTION GUARANTEE:
If you're not 100% satisfied with Tool Kit, simply return it for a full refund in 60 days. Premium Support & 2 Years' Warranty.
Product Description:
Using Instruction:
1. Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland)
2.Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.
3. Use the pin wrench to remove the Old Seal Gland.
4.Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side.
5. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.
6. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque.
Payment
Shipping
Returns
Contact Us
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out
within 1-2 business day
after clear payment received.
2. Please make sure shipping address on your ebay account is
correct & up-to-date.
3. All of our items are shipped from our warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
1. Return to us
within 30 days
from the delivery date for exchange or refund.
Refund will be given as Money back
or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake
.
And all NON-seller mistake returns for refund are subject to
10 % re-stocking fee.
3. If you need return, please
contact
our customer service representative,
let us know the detailed problem and
end us some pictures for confirmation.
We
maintain high standards of
excellence Four 5-star
rating
and strive for
100%
customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us
immediately BEFORE you leave neutral
or negative
feedback, we will try our best to resolve any problem and make you satisfied.
Please contact us via ebay using"Contact member".
We will respond within 1 business day
or less.Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.
Please include your ebay item number or order number in
all communications.
All right reserved.