Dixell Digital Thermostat Controller Auxiliary XR03CX-5N0C1 For Refrigerating

Description

Dixell XR03CX Digital Thermostat Controller Auxiliary Relay For Refrigerating
Product Description
The XR03CX, in 32x74x50 mm short format, is microprocessor based controller suitable for applications on normal temperature refrigerating units. It provides two relay output: one for compressor and the other one for alarm signalling or as auxiliary output. It provides an NTC probe input and a digital input for alarm signalling, for switching the auxiliary output or for start defrost. The instrument is fully configurable through special parameters that can be easily
programmed through the keyboard or the by HOTKEY.
Suitable for appliances including
suitable for applications on normal temperature refrigerating units
Specification
Producer: DIXELL
Type: XR03CX-5N0C1
Mounting Measurements: 71mm x 29mm
Built-in Depth: 56mm
Supply: 230V
Voltage Type: AC
Probe Type: NTC (probes not included)
Number of Relay Outputs: 1
Relay Output 1: NO-20A(8)
Input: 1NTC
Kind of Protection: IP54
Version: Defrosting Function / Time Control
Measuring Range: -40°C up to +110°C
Display: 2½ Digit
Defrost
Defrost is performed through a simple stop of the compressor. Parameter id controls the interval between defrost cycles, while its length is controlled by parameter Md.
SAFETY PRECAUTIONS
• Check the supply voltage is correct before connecting the instrument.
• Do not expose to water or moisture: use the controller only within the operating limits avoiding
sudden temperature changes with high atmospheric humidity to prevent formation of
condensation.
• Warning: disconnect all electrical connections before any kind of maintenance.
• Fit the probe where it is not accessible by the End User. The instrument must not be opened.
• In case of failure or faulty operation send the instrument back to the distributor or to “Dixell
S.r.l.” (see address) with a detailed description of the fault.
• Consider the maximum current which can be applied to each relay (see Technical Data).
• Ensure that the wires for probes, loads and the power supply are separated and far enough
from each other, without crossing or intertwining.
• In case of applications in industrial environments, the use of mains filters (our mod. FT1) in
parallel with inductive loads could be useful.
Package Include
1 X Dixell XR03CX Digital Thermostat Controller(Whole package with accessories)
On Sep-15-21 at 10:16:04 PDT, seller added the following information: