for Seastar Hydraulic Steering Cylinder Seal HS5157 + Bracket Puller + Bleed Kit

Description

for Seastar Hydraulic Steering Cylinder Seal HS5157 + Bracket Puller + Bleed Kit
📌
APPLICATION
->>
①Bleed Kit - For Seastar hydraulic steering systems. ②Bracket Puller fits SeaStar and Uflex support brackets, including older style SeaStar Tournament brackets.③HS5157 kit fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755
📌
FUNCTION
->>
①Used for refilling your boat's steering system fluid. One person easily controls the bleed process from end to end.②Puller helps safely remove SeaStar and Uflex support brackets. ③Replacement front seal kit for SeaStar pivot / front mount cylinders. Used to repair leaking or weeping cylinder seals.
📌
BENEFITS
->>
①Changing out fluid bottles is quick and clean. Entire steering system remains sealed during the bleed process from end to end, ensuring that fluid goes where it is supposed to go!②Designed to minimize damage to the steering bracket during removal process. Works great while minimizing ugly gouges and scrapes on your brackets.③Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering.
📌
QUALITY
->>
①Our bleed kit is easy to attach and use. The bridge tube now comes with hose clamps for a perfect fit.②Puller - High strength forged steel with black oxide finish. ③HS5157 - Made From High Quality Aircraft Grade Aluminum. Ensure a long life service.
📌
PACKAGE INCLUDE
->>
①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings.②1 x Steering Support Bracket Puller,③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings.
HYDRAULIC STEERING SUPPORT BRACKET PULLER:
Removes safely compatible with SeaStar and Uflex support brackets and minimize reduce damage of the steering bracket during removal process.
STEERING FILTER BLEED KIT:
Used for refilling your boat's steering system fluid. One person job, entire steering system remains sealed always during the bleed process to ensure the fluid accurate delivery.
HS5157 kit contains:
Seal Glands, Pin Wrench, Seal Gland Assembly Guide Tool, Various O-rings
FRONT MOUNT STEERING CYLINDER SEAL KIT
Compatible:
For HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)).
Fits for front mount cylinder parts:
HC5340, HC5341, HC5342, HC5343, HC5344
HC5345, HC5346, HC5347, HC5348, HC5358
HC5365, HC5375, HC5394, HC5445, HC6750
HC6751, HC6752, HC6753, HC6754, HC6755
Installation Steps:
1. Loosening the Seal Gland
Turn the outboard hard to port; place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland.
2. Removing the Support Bracket
Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.
3. Removing the Old Seal Gland
Finish unscrewing the old seal gland. If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod.
4. Installing the New Seal Gland
Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.)
5. Reinstalling the Support Bracket
Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.
6. Tightening the New Seal Gland
Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque
Use for all inboard/outboard hydraulic helms.Hose with screw cap which fits for SeaStar or equivalent oil bottles.Allows for clean bleed when used properly.
Used to connect to two Bleed fittings on steering cylinder.It can much improve clearance between cylinder bleed valves and bottom of engine compartment
This bleed kit is compatible with Seastar hydraulic steering systems.Used for refilling your boat's steering system fluid.
Instruction:
1. Take haft(half) of the bolt out and insert the puller into the bracket;
2. Screw the bolt to lock the bracket;
3. Use a driver or socket to tighten the bolt, pressing the bracket out
HYDRAULIC STEERING SUPPORT BRACKET PULLER
Compatible:
Fit for SeaStar and Uflex support brackets, older style compatible with SeaStar Tournament brackets included.
Help safety remove compatible with Seastar and Uflue support brackets and minimize damage to the steering brackets during removal process.
Teeth design fit to grip the brackets.
Applied with 3/4'' wrench or socket to fit the drive bolt.
PACKAGE INCLUDE:
①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings.
②1 x Steering Support Bracket Puller,
③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings.
1.
Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.
2.
All of the items are shipped from our
Warehouse in
USA
.
1.
Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days.
2.
Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
About Feedback:
Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
We maintain high standards of excellence
and strive for 100% customer satisfaction!
Feedback is very important to us.
If possible,please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward!
On May-25-22 at 21:57:06 PDT, seller added the following information:
On May-26-22 at 02:22:56 PDT, seller added the following information:
On May-26-22 at 07:05:07 PDT, seller added the following information:
On May-26-22 at 12:12:58 PDT, seller added the following information:
On May-26-22 at 17:08:48 PDT, seller added the following information: