Inkbird 110V~240V PID Temperature Controller Thermostats 25DA SSR K Sensor Probe

Description

ITC-100VH One SSR Output + One Relay Alarm Output 100V-240V AC
Warranty: 1 Year
Main Features:
●Front Panel Dimension:
DIN (48WmmX48Lmm), Cutout size: 45x45mm
●Support Multiple Thermocouples and Resistance Sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
● Wide Controlling Range:
-50～1300ºC(Please note the k sensor temperature range: 0~400℃)
●Power Supply Voltage: AC 100-240V ±10% 50/60Hz
●Main Output: Voltage Pulses Output (ITC-100V):  DC 12V, 30mA;
Alarm 1 AC250V 3A (Resistive load) ON/NC
● High Accuracy of Displaying and Controlling 0.1ºC, Accuracy of Measurement ±0.2%FS
●
PID and ON/OFF Control Mode, High Standard Self-adjusting Function
● Multiple Outputs and Alarm Modes
● Build-in Adjustable Digital Filter Reduce Interference
● The Self-adjusting Function and Intelligent Control of the Instrument Ensure the Long-term Stability
● High Luminance, 0.39” height LED display, Anti-glare panel
● Built-in Switch Power Supply, Wide Voltage Range and Low-power Consumption
Specification：
●Units:    Degree Celsius (＜1000ºC)
●Operating voltage range: 85～110% Rated voltage
●Power Consumption: Approx. 5VA（100～240VAC）
Approx. 4VA（12～24VAC）
Approx. 3W（12～24VDC）
●Display Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
●Display Accuracy: ±0.2%FS 0.1ºC(＜1000ºC)；1ºC(≥1000ºC)
●Period of Sampling: 0.5S
●Temperature Compensation: 0-50ºC
●Life Expectancy of Relay: Mechanical≥10,000,000 operations    Electrical≥10,000,000 operations
●
Weight: Approx. 140g
●Environmental Conditions: -10～55ºC(no icy or condensation), RH 35-85% Humidity
●Storage Temperature: -25～65ºC(no icy or condensation)
●Data Storage: 10year
●Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller .
- Temperature rang :
0-400
ºC
- Sensor Dia: 4.5mm
- Cable Length: 2m(6.6ft)
- External Shielding: Insulated Shielding
- Internal Insulation: Fiberglass
25A SSR SOLID STATE RELAY for temperature controller
About SSR:
- A solid state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts.
- The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR.
- A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.
- The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode.
- The diode turns on a back-to-back thyristor,silicon controlled rectifier, or MOSFET transistor to switch the load.
Features:
- Reliable SMT technology
- High ultra insulation resistance over 50Mω/500V DC
- High dielectric over more than 2.5KV
- Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
- Low EMI/EFI & surge by zero cross trigger method
- High surge current over 410A/one cycle (60Hz)
- High surge voltage duration by snubber circuit
Specifications:
- Load   Voltage: 24-380VAC
- Load Current: 25A
- Input Voltage: DC 3-32V
Package included:
1pcs × INKBIRD AC 220V Dual PID Digital Temp Controller ITC-100VH
1pcs × K Sensor 2M
1pcs × 25DA SSR SOLID STATE RELAY
1pcs × Heat Sink
On May-27-21 at 01:18:10 PDT, seller added the following information: