Inkbird Aquarium Thermostat Heater Digital Temperature Controller Removal Probe

Description

Inkbird ITC-308S + Aquarium Probe US PLUG
Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
F/C degree display; Easy to set, PV and SV dual display windows
Dual display window, be able to display measured temperature and set temperature at the same time
The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
Maximum output load: 1100W(120V); Alarm when over-temperature and sensor error
Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
Package Content:
1x ITC 308S Temperature Controller ;
1x Aquarium Probe
1x Manual