INKBIRD Digital PID Temperature Controller ITC-100VH + K sensor + 40A SSR heater

Description

Main Features:
●Front Panel Dimension: DIN (48WmmX48Lmm), Cutout size: 45x45mm
●Support Multiple Thermocouples and Resistance Sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
●Wide Controlling Range: -50～1300ºC (K sensor)
●High Accuracy of Displaying and Controlling 0.1ºC, Accuracy of Measurement ±0.2%FS
●PID and ON/OFF Control Mode, High Standard Self-adjusting Function
●Multiple Outputs and Alarm Modes
●Build-in Adjustable Digital Filter Reduce Interference
●The Self-adjusting Function and Intelligent Control of the Instrument Ensure the Long-term Stability
● High Luminance, 0.39” height LED display, Anti-glare panel
●Built-in Switch Power Supply, Wide Voltage Range and Low-power Consumption
Specification：
●Units:    Degree Celsius (＜1000ºC)
●Power Supply Voltage:    AC 100-240V ±10% 50/60Hz
AC/DC 12-24V ±10%  50/60Hz
DC 12-24V ±10%
●Operating voltage range：  85～110% Rated voltage
●Power Consumption：       Approx. 5VA（100～240VAC）
Approx. 4VA（12～24VAC）
Approx. 3W（12～24VDC）
●Display Character:     PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
●Display Accuracy:    ±0.2%FS 0.1ºC（＜1000ºC）；1ºC（≥1000ºC）
●Period of Sampling：       0.5S
●Temperature Compensation：       0-50ºC
●Main Output：     Relay Contact Output (ITC-100R):  AC250V 3A (Resistive load) ON/NC.
Alarm 1 AC250V 3A (Resistive load) ON/NC.
Voltage Pulses Output (ITC-100V):  DC 12V, 30mA;
Alarm 1 AC250V 3A (Resistive load) ON/NC
●Life Expectancy of Relay: Mechanical≥10,000,000 operations    Electrical≥10,000,000 operations
●Weight: Approx. 140g
●Environmental Conditions:  -10～55ºC（no icy or condensation）, RH 35-85% Humidity
●Storage Temperature: -25～65ºC（no icy or condensation）
●Data Storage: 10year
●Mounting Method: Flush mounting and screw terminals
K sensor:
Temperature rang :0-400 C
Sensor Dia:           4.5mm
Cable Length:        2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
40A SSR SOLID STATE RELAY for temperature controller
About SSR:
A solid state relay (SSR) is an electronic switch, which, unlike an electromechanical relay, contains no moving parts. The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR. A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load. The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode. The diode turns on a back-to-back thyristor,silicon controlled rectifier, or MOSFET transistor to switch the load.
Features:
Reliable SMT technology
High ultra insulation resistance over 50Mω/500V DC
High dielectric over more than 2.5KV
Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
Low EMI/EFI & surge by zero cross trigger method
High surge current over 410A/one cycle (60Hz)
High surge voltage duration by snubber circuit
Specifications:
Load   Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V
Package included:
1pcs × INKBIRD AC 220V Dual PID Digital Temperature Controller ITC-100VH
1pcs ×
K type thermocouple 2M
1pcs × 40
A SSR SOLID STATE RELAY