Inkbird Digital Temperature Controller ITC608T Thermostat 15A 110V 2 Temp Probes

Description

Inkbird Temperature and Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat with 12 Period
Time Stage, 1800w, ETL listed (With 2 Temperature Sensors)
Bullet Point
1.Three in one Multifunction Temperature Mode with Dual Relay Output.
ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller.
First, only plug temperature sensors with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment.
Third, plug both temperature and humidity sensors with cooling/heating and humidifier/dehumidifier equipment.(Note:now the item only comes with the temp sensor)
2. Supporting calibration, compressor delay, and saving reset setting values.
Easy to set, PV and SV dual display windows. And with compressor delay for protecting humidifier device.
ITC-608T can save the original setting values in case accidentally power-off.
3. More power up to 1800W.
Temperature control range is -40-212°F(-40-100°C)Max Loading: 120V 15A 1800W.
The temperature sensor is waterproof.
4. Multifunction usage.
Temperature controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse,
terrarium, reptile, planting (mushroom), meat storage, and cooking.
Please note:
This item only includes 2 temperature probes, humidity probe is not included!
Main features:
*Plug and play design, easy to use, can control temperature and humidity at the same time
*Dual relay output, can connect with refrigeration and heating equipment at the same time; can connect with humidifier
and dehumidifier equipment at the same time;
can connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect the temperature
controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time periods
Specification
Maximum output load:120Vac, 60Hz, 15A, 1800W
Temperature measurement range:-40-100°C/-40°F-212°F
Temperature display accuracy:0.1°C/°F(<100°C/°F)
Relative humidity measurement range:5~99%RH
Humidity display accuracy:0.1%RH
Display unit:temperature: Celsius °C or Fahrenheit °F；humidity:%RH
Ambient temperature:-20°C to 60°C or -4°F to 140°F
Storage environment:temperature:0°C-60°C or 32°F-140°F;humidity:20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m（78.74in）
Humidity sensor cable Length:2m（78.74in
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Package Content:
1x ITC-608T temperature and humidity controller;
2x Temperature sensor
1x Manual