Inkbird Heat Cool 220V Digital Temperature Controller Thermostat Thermocouple US

Description

Inkbird ITC-308S 110V~240V Pre-wired Programmable Digital Heating Cooling Temperature Controller Outlet Thermostat With removable Probe Sensor
Features:
- Plug and play design, easy to use;
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
- Support reading with
Centigrade or Fahrenheit unit
;
Maximum output load: 2400W(240V);
- Dual display window, be able to display measured temperature and set temperature at the same time;
- Compressor delay protection for refrigeration control High and low temperature alarms are available;
-
Over-temperature and sensor fault alarm Temperature calibration;
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
-
F/C degree display
; Easy to set, PV and SV dual display windows
- Dual display window, be able to display measured temperature and set temperature at the same time
- The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
- Alarm when over-temperature and sensor error
- Sensor Probe could be removed,easy to change
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
Specification:
- Temperature Control Range :
-50~120°C / -58~248°F
- Temperature Resolution: 0.1 °C / 0.1°F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160°F)
- Temperature Control Mode :
On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
- Temperature Control Output:
Max. 10A, 100V ~240V AC  (It can apply to the voltage from 100V to 240V)
- Buzzer Alarm: High and Low ,Probe Lose connection
- Socket: 112 x 46 x 27 mm( 4.1 x 1.8 x 1.0 inch)
-
Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft
- Ambient Temperature: -30~75°C / -22~167°F
- Storage Temperature: -20~60°C / -4~140°F Humidity 20~85%Rh (No Condensate)
- Warranty: 1 Year
How to work:
Connect with a heater and a cooler , heating socket for heater,cooling socket for cooler.
The temperature range you want to control is: 20~30℃ ,then you can set TS=25℃, HD=5,CD=5.
When Ambient Temperature is higher than 30℃(TS+CD), it will turn on the cooler, turn off at 25℃.
When Ambient Temperature is lower than 20℃(TS-HD), it will turn on the heater, turn off at 25℃.
Package Included:
1x ITC 308S Temperature Controller with 6.65ft DC Cord Sensor (US Plug)
1x English User Manual
On Nov-17-20 at 00:08:22 PST, seller added the following information: