Inkbird ITC-100VL PID Digital Temperature Controller Thermostat 25A SSR K Sensor

Description

ITC-100VL Digital PID Temperature Controller 12V Thermometer + 25DA SSR + K Sensor
Model: ITC-100VL
Main Features:
●Front Panel Dimension: DIN (48WmmX48Lmm), Cutout size: 45x45mm
●Support Multiple Thermocouples and Resistance Sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
●Wide Controlling Range:
-50～1300ºC (K sensor)
●High Accuracy of Displaying and Controlling 0.1ºC, Accuracy of Measurement ±0.2%FS
●PID and ON/OFF Control Mode, High Standard Self-adjusting Function
●Multiple Outputs and Alarm Modes
●Build-in Adjustable Digital Filter Reduce Interference
●The Self-adjusting Function and Intelligent Control of the Instrument Ensure the Long-term Stability
● High Luminance, 0.39” height LED display, Anti-glare panel
●Built-in Switch Power Supply, Wide Voltage Range and Low-power Consumption
Specification：
●Units: Degree Celsius (＜1000ºC)
●Power Supply Voltage:
AC 100-240V ±10% 50/60Hz
AC/DC 12-24V ±10%  50/60Hz
DC 12-24V ±10%
●Operating voltage range: 85～110% Rated voltage
●Power Consumption：
Approx. 5VA（100～240VAC）
Approx. 4VA（12～24VAC）
Approx. 3W（12～24VDC）
●Display Character:
PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
●Display Accuracy: ±0.2%FS 0.1ºC(＜1000ºC); 1ºC（≥1000ºC）
●Period of Sampling: 0.5S
●Temperature Compensation: 0-50ºC
●Main Output： Relay Contact Output (ITC-100R):  AC250V 3A (Resistive load) ON/NC. Alarm 1 AC250V 3A (Resistive load) ON/NC.
●Voltage Pulses Output (ITC-100V):  DC 12V, 30mA;  Alarm 1 AC250V 3A (Resistive load) ON/NC
●Life Expectancy of Relay: Mechanical≥10,000,000 operations    Electrical≥10,000,000 operations
●Weight: Approx. 140g
●Environmental Conditions: -10～55ºC(no icy or condensation), RH 35-85% Humidity
●Storage Temperature: -25～65ºC(no icy or condensation)
●
Data Storage: 10year
●Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller .
●
Temperature rang :0-400 ℃
●
Sensor Dia: 4.5mm
●
Cable Length:
2m(6.6ft)
●
External Shielding: Insulated Shielding
●
Internal Insulation: Fiberglass
25A SSR SOLID STATE RELAY for temperature controller
About SSR:
●A solid state relay (SSR) is an electronic switch, which, unlike  an electromechanical relay, contains no moving parts.
●The types of SSR are photo-coupled SSR, transformer-coupled SSR, and hybrid SSR.
●A photo-coupled SSR is controlled by a low voltage signal which is isolated optically from the load.
●The control signal in a photo-coupled SSR typically energizes an LED which activates a photo-sensitive diode.
●The diode turns on a back-to-back thyristor,silicon controlled rectifier, or MOSFET transistor to switch the load.
Features:
●Reliable SMT technology
●High ultra insulation resistance over 50Mω/500V DC
●High dielectric over more than 2.5KV
●Low enable current less than 7.5mA/12V DC, compatible with CMOS IC or TTL
●Low EMI/EFI & surge by zero cross trigger method
●High surge current over 410A/one cycle (60Hz)
●High surge voltage duration by snubber circuit
Specifications:
Load   Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
Package included:
1pcs × INKBIRD AC 12V Dual PID Digital Temperature Controller ITC-100VL
1pcs × K Sensor 2M
1pcs × 25DA SSR SOLID STATE RELAY
On May-28-21 at 02:15:12 PDT, seller added the following information: