-40%
Inkbird Temperature Humidity Controller Thermostat Humidistat 120V ITC-608T Brew
$ 31.41
- Description
- Size Guide
Description
Inkbird Temperature and Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL listedDescription:
ITC-608T is an ETL certificated Temperature and humidity controller with 12 different time stage temperature periods Or only control humidity with plug humidity sensor. which is a good choice for home brewing, fermenting, Greenhouse, terrarium, reptile, planting, meat storage and cooking.
Bullet point:
1.
US ETL Certificate Listed
:ETL listed, rigorously tested for quality control and safety.
2.Warranty :
The unit itself has 2 years warranty. sensor have 1 year warranty
.
3.Three in one Multifunction Temperature and Humidity Control Mode with
Dual Relay Output
. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller.
4.
Supporting calibration, compressor delay and saving reset setting values
: Compressor delay for device protection and save original setting values in case accidentally power-off.
5.More power up to
1800W. Max Loading: 120V 15A 1800W.
Temperature senor is
waterproof
while humidity sensor is not.
6.Multifunction usage: Can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Notes:
Make it work as a temperature controller ,a humidity controller or a temp & humidity controller depends on the sensor you choose.
First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
Main features:
*
Plug and play design, easy to use
, can control temperature and humidity at the same time
*Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support
reading with Centigrade or Fahrenheit unit
* Maximum output load:
1800W (120V, 15A)
* Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity
calibration
*
Compressor delay protection
for refrigeration control
* High and low temperature/humidity
alarms
are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
*
Support setting 12 different temperatures in 12 different time period
* Easy to set, PV and SV dual display windows.
Specification:
- Maximum output load:
120Vac, 60Hz, 15A, 1800W
- Temperature display accuracy:0.1℃/℉(<100℃/℉)
- Temperature control range is
-40-212°F(-40-100℃),
humidity display range is
5 -99.0%RH
.
- Relative humidity measurement range:5~99%RH
- Humidity display accuracy:0.1%RH
- Display unit:temperature:Celsius °C or Fahrenheit °F;humidity:%RH
- Ambient temperature:-20℃~60℃/-4℉~140℉
- Storage environment:temperature:0℃~60℃/32℉~140℉;humidity:20~80%RH(Unfrozen or condensation state )
- Temperature sensor cable Length: 2m(78.74in)
- Humidity sensor cable Length:
2m(78.74in)
- Input Power Cable Length: 1.5m(59.05in)
- Unit Dimension: 20.8cm*8.5cm*3.5cm(8.19*3.35*1.38in)
- Warranty:
2 year
Package Content:
1x ITC-608T temperature and humidity controller;
1x Temperature sensor
1x humidity sensor
1x Manual