LuxPro Contractor Grade Programmed Electric Thermostat PSP511LC New

Description

LuxPro Contractor Grade Programmed Electric Thermostat PSP511LC New
System or Battery Powered, Low Voltage Electronic Setback Heating and Cooling Thermostat with Lighted Display, Sealed Relay Contacts, Pre-programmed with Four Adjustable Heating and Four Adjustable Cooling Programs for Weekdays, and Four Adjustable Heating Programs and Four Adjustable Cooling Programs for Weekends.
Compatible With:
Most 24v Gas, Oil, Electric Heating and Air Conditioning Systems
Single Stage Heat Pumps
2 Wire Hydronic Air Handlers
Not Compatible with:
Multi-stage Heat Pumps
Multi-stage Gas or Oil Furnaces
3 Wire Hydronic Systems
Line Voltage Systems (120/240 VAC)
FEATURES:
1 Heat / 1 Cool
Preprogrammed
Separate Programs for Heating and Cooling
System or Battery Powered (2AA Batteries included)
Separate Weekday and Weekend Programming
Programmable Filter Timer with Filter Change Indicator
5 Minute A/C Compressor Delay
Large Liquid Crystal Display
Temporary Temperature Override
Manual Temperature Hold
Easily Reprogrammed with LUX SpeedDial®
Total Isolation Between System Power and Thermostat Capable
Contractor Grade
Energy Star Compliant
Battery Free Memory Storage
Default Energy Star Approved Program
Armchair Programmable
3-Year Warranty
EL (Electro-Luminescent) Backlight
F/C Selectable
12/24 Hour Clock Display
Set Temperature Range 45°F to 90°F (7°C to 32°C)
Adjustable Temperature Differential/Cycle Rate (.25 – 2.25ºF)
Filter Counter Can Be In Days Left or Percent (%) Left
On Screen Low Battery Indicator
Soft Touch Buttons
4 Periods Per Day
Keyboard Lockout
Optional Decorative Wall Plate Available
SPECIFICATIONS:
Electrical Ratings: 1.5 AMPS at 24 VAC
Battery Powered: 2 "AA" Alkaline Batteries (included)
Temperature Differential: Adjustable from .25°F to 2.25°F.
Lighted Display: Celsius and 12/24 HR. Time Capable.
Accuracy: ±1°F over a range of 45°F to 90°F.
Temperature Control Range: 45°F to 90°F (7°C to 32°C).
Temperature Display Range: 23°F to 99°F (-5°C to 37°C).
Terminals: RH, RC, Y, W, G, C, O, B, Solid Pin Connections Allow usage for 24V and Millivolt Systems.
Program Settings: 4 Preset Programs Per Day Heating and Cooling. All may be Easily Reprogrammed in 1° F/C and 15 Minute Increments.
Technical Service Number Listed for Help in Reprogramming.
Circuit Protection: Circuit Protection is Built-in, No Isolation Relays Required
Compressor Protection: Built-in 5 Minute Time Delay
Environmental Limits:
Moisture and Dust: meets IP20.
Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: 14°F to 122°F (-10°C to 50°C).
Storage Temperature: -4°F to 140°F (-20°C to 60°C).
Electrical Immunity: meets relevant EMI/EMC specifications.
View Area: 50mm x 19.5mm