MSP6729 Magnetic Rotate Speed Sensor Pick Up Sender Ring Gear Teeth 3/8-24UNF-2A

Description

MSP6729 Magnetic Rotate Speed Sensor Pick Up Sender Ring Gear Teeth 3/8-24UNF-2A
Details&Application
Part Name: Speed Sensor
Manufacturing Part Number: MSP6729
Introduction:
*The magnetic speed sensor indicates when ring gear teeth, or other ferrous projections, pass the tip of the sensor.
*Electrical impulses are induced within the coil and sent to the speed control unit. The signal from the magnetic speed Sensor, teeth per second(HZ), is directly proportional to engine speed.
Description:
*The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.
*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered
over the ring gear teeth.
*A spot face should be present to provide a flat surface on which to anchor the locknut.
*With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut.
*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications
*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
*The leads may need shielding if they are longer than 10 ft. (3m), or if external interference is present.
*Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.
Specification:
MSP6729
3/8 - 24 UNF Threaded
2.5" Length with 6' Shielded Cable
All are designed and tested to operate within a temperature range of -65°F to 225°F (-55°C to 105°C) .
Magnetic Speed Sensors are with Wire Leads
Pickup Length:2.7
Thread Length: 2.25
Lead Length: 72.00
Thread Size :3/8-24 UNF-2A
Drill Size:.332
Shipping Policy
Payment
Return Policy
Contact
Shipping Policy
●Standard Shipping from America warehouse:
USPS First Class Package usually takes 3-5 workdays
UPS Surepost usually takes 1-6 workdays
UPS GROUND usually takes 1-5 workdays
● Expedited Shipping From America warehouse:
USPS Priority Mail Parcels Tracked Service : takes 1-3 workdays
● UPS NEXT DAY AIR SAVER SERVICE is also avaliable for most districts , if need , please contact us . Thanks
● Order will be shipped out within 1 to 3 business days upon payment received or cleared.
All these transport timeliness Don't apply to remote districts .
Payment
● 0nly PayPal payments are accepted .
● Items are usually sent to eBay address . Please make sure it is correct.
● Payments must be completed within 3 workdays after auction ended .
Return Policy
● If defective , damaged or wrong products are received , please contact us immediately . Returns are accepted within 30 workdays of delivery date and item must be in original new condition . We strictly respect the rules of eBay platform and will stand the cost if it is our mistake .
● Customer satisfaction is our top goal. We promise that our items are new , function well and quality inspected before shipment . You will be happy with your purchase here .
● Please contact us first if you have any questions . We will do our best to offer you satisfied resolutions .
Contact
Please contact us via ebay message , we will reply you within 24 hours . Please keep patient because you and us may have time difference, any issue will be solved via friendly communcation . Thanks