VICTOR 9000F Wireless H/L Voltage Hook Ammeter Current Tester Clamp Meter

Description

VICTOR 9000F Wireless H/L Voltage Hook Ammeter Current Tester Clamp Meter
Notice:
The standard package don't include batteries.
Because,the international air shipping forbid to ship liquid,powder and batteries,
we can not put them in the package box.
Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual.
If you need it, please contact the customer service after purchase.
Thanks for your support!
basic skills
VICTOR 9000E
VICTOR 9000F
Model distinction
Fork type (which can be switched from different angles)
Check type (switching from different angles)
Features
High-voltage AC current measurement, low-voltage AC current, online AC current monitoring
power supply
DC6V alkaline dry battery (1.5V AAA×4)
test method
Non-contact U-CT
transfer method
433MHz wireless transmission, the transmission distance is about 100 meters
Display mode
4-digit LCD display, backlight function, suitable for dim places
LCD size
47mm×28.5mm
Instrument size
Tester: 107mm × H 252mm × thick 31mm; Receiver: 78mm × H 212mm × thick 41mm
Tester: Wide 210mm × Hight 246mm × thick 45mm; Receiver: Width 78mm × Hight 212mm × thick 41mm
Jaw size
φ68mm
φ128mm
Insulating rod size
φ45mm, closed state 1150mm, extended state about 4500mm.
Insulating rod voltage level
110KV
Sampling rate
2 times/sec
Measuring range
0.00A～9999A (50/60Hz automatic)
Resolution
0.01A
Change files
0.00A～9999A fully automatic gear shift
Test accuracy
±2%±5dgt (The wire is located near the center of the bottom end of the U-shaped jaw, 23℃±2℃)
Position error
The wire under test should be as close as possible to the center of the bottom end of the U-shaped jaw
data storage
99 groups, the "MEM" symbol indicates during the storage process, and the flashing display of the "FULL" symbol indicates that the storage is full
Line voltage
Test of bare wires below 60kV (operation with insulating rod, fully extended telescopic insulating rod)
Data retention
In the normal test mode, press the HOLD key to keep the data, the "HOLD" symbol is displayed, and then press the HOLD key to cancel
Data access
The "MR" symbol indicates that the stored data can be flipped up and down
Overflow display
Over-range overflow function: "OL A" symbol display
No signal indication
When the receiver does not receive the transmitted signal, the "no- -" symbol is displayed dynamically
Automatic shut-down
About 15 minutes after power on, the meter will automatically shut down to reduce battery consumption
Instrument quality
Detector: 235g (including battery), receiver: 280g (including battery, total mass of the meter: 2300g (including insulating rod and battery)
Working temperature and humidity
-10℃～40℃; below 80%Rh
Interference
Try to avoid 315MHz, 433MHz co-frequency signal interference
Dielectric strength
AC 220kV/rms (the telescopic insulating rod is fully opened, between the two ends)
Random accessories
Clamp meter: 1 piece; receiver: 1 piece; telescopic insulating rod: 1 piece; battery LR03: 8 pieces; cloth bag: 1 piece