WiFi Touch Control Thermostat for Heating Floor Temperature Smart Control Saving

Description

We are offering the HiTech product with the best features for your convenience.
You need just touch to add temperature or switch off electric heating system. The best using with Greelex Radiant Heating films.
Easy to install, full control by mobile phone app using home WiFi network.
You will get outside infloor sensor value as free gift.
Product name
WiFi Smart digital touch color screen thermostat
Heat medium
Water heating / Floor heating / Electric heating film temperature control
Set temperature by time period
6 time periods        5+2 / 6+1 / 7+0           No daily programming
Voltage
85~265V, 50~60Hz （Electric heating 16A / Water heating 3A）
Power waste
1~3W Max（No wifi 1W / Wifi 3W）
Temperature control range
5～95 F
Temperature deviation
0.5 F
Environmental temperature and humidity
-5 ～50℃
Degree of protection
IP20
Case Material
Flameresistant material PC
A room thermostat simply switches the heating system on and off as necessary. It works by sensing the air temperature, switching
on the heating when the air temperature falls below the thermostat setting, and switching it off once this set
temperature has been reached. Turning a room thermostat to a higher setting will not make the room heat up any faster. How quickly
the room heats up depends on the design of the heating system, for example, the size of boiler and radiators.
Neither does the setting affect how quickly the room cools down. Turning a room thermostat to a lower setting will result in the
room being controlled at a lower temperature, and saves energy.
The heating system will not work if a time switch or programmer has switched it off.
The way to set and use your room thermostat is to find the lowest temperature setting that you are comfortable with, and then
leave it alone to do its job. The best way to do this is to set the room thermostat to a low temperature – say 18ºC – and then
turn it up by one degree each day until you are comfortable with the temperature. You won’t have to adjust the thermostat further.
Any adjustment above this setting will waste energy and cost you more money.
If your heating system is a boiler with radiators, there will usually be only one room thermostat to control the whole house.
But you can have different temperatures in individual rooms by installing thermostatic radiator valves (TRVs) on individual
radiators. If you don’t have TRVs, you should choose a temperature that is reasonable for the whole house. If you do have
TRVs, you can choose a slightly higher setting to make sure that even the coldest room is comfortable, then prevent any
overheating in other rooms by adjusting the TRVs.
Room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by
furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat from working properly.